Eachine Wizard X220S FPV Drone Racer

Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 800TVL CCD iRangeX iRX-i6X RTF CLICK THIS LINK

Eachine Wizard X220S FPV Racing Drone
Eachine X220S Wizard Racing Drone Layout Diagram

The Wizard Range of FPV Racing Drones by Eachine have been an outstanding success and BANGGOOD will release the Wizard X220S very soon with the Omnibus F4 V3 flight controller. This 220 sized drone racer looks a real beauty and it will surely be one of the very best ready to fly drone racers ever produced. Priced at ONLY $249.99 on BANGGOOD CLICK THIS LINK for delivery details.

Wizard X220S Racing Drone
Front View of the Stylish Wizard X220S Racing Drone

Wizard X220S Drone Racer Description:

Item Specification
Eachine Wizard X220S
Wheelbase: 220mm
Frame arm: 4mm light material
Weight: 356g (without battery and camera mount)
Take off weigh: 561g
Package weight: 1728g

CLICK THIS LINK

The Eachine Wizard X220S uses a light composite material.

4mm thickness and 15mm width frame arms, the width is 10mm less than Eachine Wizard X220.

Frame kit with camera angle scale and 30° camera mount for Runcam 3 Gopro session.

Anti-vibration sponges to protect the racing drone from crashing.

Eachine MN2206 2300KV motor

KV: 2300
Max thrust: 1100G
Length: 35MM
NO.OF cell: 3-5S
Diameter: 28MM
Framework: 12N14P
Shaft: 3MM
Propeller: 5 inch
Weight: 28g

CLICK THIS LINK

Eachine 30A BLHELI_S 4 in 1 ESC
Con. current: 30A
Peak current (10S): 35A
Input voltage: 2-5S
BEC: No
Programming: YES
Firmware: blheli_s
Weight: 28g
Size: 36*36MM

Eachine 1179 800TVL CCD camera
Color: purple

Sensor: CCD

Resolution(horizontal center): 800TVL

Shell size: 25mm*25mm

Weight: 11g

Resolution: PAL: 1980H×1080 (2MP) NTSC: 1980H×1080V (2MP)

Format: PAL/NTSC switchable

Video output: 1.0Vp-p/75Ω

Automatic gain control: 0.25/0.50/0.75/1.00 adjustable, up to 55dB.

AWB: ON/OFF

Exposure mode: electron exposure

Electronic shutter: 1/50(1/60) – 1/100000 S

Gamma correction: 0.45/1.0

Synchronization method: internal synchronization

Lens: standard 2.8mm lens

Working voltage: DC12V (Wide Voltage, measured that can be work in 5-13V)

Working current: 70mA (low power consumption)

Working temperature: -20℃–60℃

Humidity: 0%~98%
Strong backlighting effect

5.8G 72CH 25MW 200mw 600MW
switchable transmitter

Video Format : NTSC/PAL
Channel: 72CH
Operating Temperature : -10~85℃
Connector: SMA Female (Inner hole)
Antenna Connector: SMA male (Inner needle)

Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 800TVL CCD iRangeX iRX-i6X RTF

Omnibus F4 V3 flight controller

Size: 36x36mm

Mount holes: 30.5×30.5mm

STM32 F405 MCU, Runs Betaflight 3.0.1 firmware, could run faster loop time.

Using F4 MCU controls OSD over SPI bus in DMA mode.

OSD Configation has been included in Betaflight GUI.

SBUS/PPM input (Pinheaders)

6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)

NO BARO

SPI Sensor MPU6000
Included 128Mbit Flash, please always use BEC for the FC.

Supported by BETAFLIGHT and dRonin

Eachine Wizard X220S Drone Racer Transmitter
iRangeX iRX-i6X 2.4GHz 10CH Remote Control

iRangeX iRX-i6X 2.4GHz 10CH remote control

Channel: 6-10 (Default 6)
Model Type: Fixed-Wing/Glider/Helicopter

RF Range: 2.408-2.475GHz

RF Power: < 20dBm

RF Channel: 135

Bandwidth: 500KHz

2.4GHz System: AFHDS 2A / AFDHS

Modulation Type: GFSK

Stick Resolution 4096

CLICK THIS LINK

Low Voltage Warning: < 4.2V DSC port: PS/2 Port PPM Chargeable: No Antenna Length: 26mm (Dual Antenna) Weight: 392g Power: 6V DC 1.5AA*4 Display: STNTransflective Display, LCD 128×64 Lattice, VA 73x39mm, LCD with white backlight Size: 174x89x190mm On-line Update: Yes Color: Black Certificate: CE0678, FCC ID: N4ZFLYSKYI6X iRangeX iR-A8S receiver   Channels: PPM 8CH Model type: Multi-rotor Frequency range: 2.408-2.475GHz Band width: 500KHz Band number: 135 RX Sensitivity: -92 dBm 2.4GHz system: AFHDS 2A Modulation type: GFSK DSC port: PPM Transfer method: FHSS Data output: 1.5mm*3 Pin PPM Antenna length: 26mm (Not including brass contacts) Input power supply: 4.0-8.4V Display method: LED No ground interference ( Transmitting and receiving 1 m from the ground): >300m
Working current: 40mA
Each channel data: depend on the transmitter
Channel delay: <15mS
Size: 20*14*5.3mm

Weight: 1.2g

Certificate: CE0678, FCCID: N45ZA8S00

1500mAH 4S 14.8V 75C battery

Capacity(mAh) : 1500

Cells (s): 4

Weight (g): 177

Length(mm): 80

Width(mm): 30

Height(mm): 33

Connector: XT60

Eachine 5051 3-blade propeller
Color: purple
Quantity: 10 Pairs
Mounting Hole: 5mm

Eachine Wizrad X220S Drone Racer
Eachine Wizard X220S Drone Racing Kit

Your Eachine X220S Drone Racer Package includes the following

1 x Eachine Wizard X220S frame kit

1 x iRangeX iRX-i6X remote control

1 x iRangeX iR-A8S receiver

2 x 2206 2300KV motor CW

2 x 2206 2300KV motor CCW

1 x Eachine 30A BLHELI_S 4 in 1 ESC

1 x Omnibus F4 V3 flight controller

1 x 800TVL camera

1 x 5.8G 72CH 25MW 200mw 600MW switchable VTX

10 x Eachine 5051 3-blade propeller purple CW

10 x Eachine 5051 3-blade propeller purple CCW

1 x 1500mAH 4S 14.8V 75C battery

Wizard X220S Battery
1500 mAh 4S Lipo Battery

1 x 30° Camera Mount(For Runcam3/Gopro session)

1 x B3 Pro charger

1 x Pagoda antenna

2 x Battery strap

2 x Wrench
(Package doesn’t include Runcam 3, the Runcam 3 on the pictures for reference only.)

CLICK THIS LINK

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s