Emax Babyhawk-R RACE(R) Edition 112mm F3 Magnum Mini 5.8G FPV Racing RC Drone 3S/4S PNP/BNF

Babyhawk R Racing Drone from Emax

For delivery date and price

CLICK THIS LINK

BabyHawk R Racing Drone
Drone Racer from Emax Babyhawk R

I’m liking the look of this new little racing drone the Babyhawk R from Emax. The frame is in carbon fibre and the Babyhawk R has low profile 3mm arms, weighing 82.5 grams without the battery. The wheelbase is 112mm on this F3 Magnum Mini Racing Drone. The F3 flight controller and the 12A electronic speed controllers are stacked in the 19mm mini flytower. The brushless motors are the solid Emax Race Special (RS) 1106 6000KV and these have Emax Avan 2inch 4 blade propellers. Emax are using a Foxeer Micro Arrow 650TVL Micro CCD Camera. The camera postion is adjustable and the Babyhawk R will come pre-programmed with Ominbus F3 Betaflight firmware for optimal race performance. The integrated OSD has low voltage detection and the Babyhawk R can use 3S or 4S Lipo batteries. The FPV system is 40 Channel 5.8g VTX with LED info display and switchable transmission power from 25/200mw. The Babyhawk R Racing Drone is compatible with EMAX Transmitter/Goggles/Accessories.

For delivery date and price

CLICK THIS LINK

There are a couple of versions and BNF version with come with the Emax receiver and there is also a PNP version.

 

     F3 Flight Controller Firmware Omnibus F3 Betaflight Target
MCU STM32F303
Accelerometer/Gyro MPU6000 ( Connected via SPI )
OSD Built-in betaflight OSD
Buzzer On-Board
BEC Integrated with 5V@ 3A BEC output
LED Pad Addressable
Avaliable Receiver Type PPM/SBUS/Spektrum DSM
Size 24x24mm; 20x20mm (M2) Mounting Hole
Net Weight 3.32g

 

12A BL_S 4 In 1 ESC Con. Current     12A
Burst Curren 15A (10S)
Support Voltage 3-4S Lipo
Firmware BLheli_S
MCU EFM8BB21F16G , 50mhz
Choic of Protocol DShot up to 600, Multishot, Oneshot125
PCB Board 30z High TG PCB Board
Size 24x25mm ; 20x20mm ( M2 ) Mounting Hole
Net Weight 4.40g
Emax Babyhawk R Drone Racer
Emax Racing Drone

Your Emax Babyhawk R Drone Racer Package Includes

1x Emax Babyhawk R 112MM Carbon Fibre Frame
4x Emax RS1106 6000KV Motor
1x F3 Magnum F3 Flight Controller
1x 12A BLheli_S 4 In 1 ESC
4x EMAX AVAN Micro 2 Inch Propellers
1x Emax Receiver for the BNF version
1x 650TVL mini Camera
1x 5.8G 40CH 25/200mW VTX

For delivery date and price

CLICK THIS LINK

 

Babyhawk R Racing Ddrone
Emax Drone Racer

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s