FPV Racing Drones from Eachine | Latest Drone Racers |New Eachine Assassin 180
Check out all the latest FPV Drone Racers from Eachine introducing the small, fast 180 Assassin with FPV Googles from Eachine
Eachine Assassin 180 FPV w/Eachine VR-007 HD Goggles I6 Transmitter Built In OSD GPS NAZE32 RTF
The Eachine Assassin 180 FPV Drone Racer is coming CLICK THIS LINK
These are the first images of the amazing Eachine Assassin FPV Drone Racer with Goggles
A New Breed of FPV Drone Racers
The Eachine Assassin 180 FPV Drone Racer hails a completely new product offering. Rather than supply a traditional FPV monitor as with previous Eachine FPV Racers they have opted to supply an FPV Goggle set as part of the Assassin Drone package. Down in size from the popular 250 size Drone Racer the assassin with have plenty of punch delivered from a 1000mAh battery via 6A 3s electronic speed controllers to the 2300KV motors spinning 4inch propellers.
The CC3D flight control used in other Eachine FPV Drone Racers has been ditched from the 180 Assassin and replaced by a Naze 32 that can programmed in Baseflight and Cleanflight. Adjusting the PID settings to ensure the Race Drone is tuned to the exact way you want it to fly is a must for serious FPV Drone Racers and the ability to tweak it in both software programs is a plus.
The Assassin, unlike any of the previous Eachine FPV Drone Racers is powered by a smart battery system pioneered by DJI in their Phantom range.
The Camera for the First Person View (FPV) Transmission is a 520TVL with an adjustable camera angle, it has High Definition and is good for night flying.
The Eachine Assassin 180 FPV Drone Racer also boasts an impressive integrated barometer, electronic compass, acceleration sensor and GPS.
Expect about 8 minutes flying time from the Assassin on a single battery charge.
The Eachine VR-007 High Definition FPV Goggles that come with the Assassin have a 4.3 inch screen with a resolution of 480×272.
Eachine have designed these FPV Goggles to be ultra-light, super soft and comfortable to wear.
The on screen data displays the flight altitude, flight speed, flight course your battery voltage status and the image transmission frequency.
What I do like is the little pop up you get when the battery voltage is low. With a flashing tail-light and Low Voltage alarm you will get plenty of warning before your Assassin Racer Drone drops out of the sky.
The Eachine Assassin 180 FPV Drone Racer is coming CLICK THIS LINK
Your Eachine Assassin 180 FPV Drone Package will include the following items:
The Eachine Assassin 180 FPV Racing Drone
A set of Eachine VR-007 FPV video glasses
Your Eachine Assassin I6 2.4G remote control transmitter
A 520TVL camera that relays the video feed back to your FPV Goggles in real-time
4 x 6A 3S Electronic speed controllers
1 x Naze 32 flight controller
4 x 1806-2300KV High Speed Motors (2 spinning in a clockwise direction and 2 spinning in a counter clockwise direction).
A 11.1 Volt 1000 milliamps per Hour Smart Battery
2 x 7.4V 800mah battery
4 x NIMH AA 2400mAh 1.2V battery
1 x Smart Battery Charging Dock
1 x Battery Charger Adapter
1 x Eachine Assassin 180 FPV Drone Racer Operating Manual
The Eachine Assassin 180 is coming CLICK THIS LINK
Latest FPV Drone Racer from Eachine the High Speed Falcon CLICK THIS LINK
Eachine Falcon FPV Drone Racer
2016 will be the year when Drone Racing really takes off. Many people participating in this pastime will be building their own models using carbon fibre frames and buying the necessary parts, motors, electronic speed controls, flight controls systems and FPV cameras. For those who have not got either the skills or the time to build their own FPV Racers then Eachine offer some great Almost Ready to Fly or Ready to Fly out of the box Racing Drone models.
The second Eachine FPV Racer we will feature is the High Speed Falcon as we expect this model to become one of the best selling ready to fly First Person View (FPV) racers in 2016. Priced at $220 on BANGGOOD it represents great value. CLICK THIS LINK
Eachine Falcon FPV Racing Frame
Racing Frame Dimensions: 230 x 245 x 90mm
Package Size: 440 x 300 x 100mm
Weight: 408g (without battery propeller)
Take off Weigh: 535g
Package Weight: 1.85kg
Eachine Falcon FPV Racing Drone Frame is compatible with maximum size 6 inch propellers with 2206,2208 motors and it can be used with 4S/3S batteries. It has directional LED light a Seft-protection function and an inclined motor base design for fast speed. The Eachine Falcon protection motor base is removable.
Electronic Speed Controllers (ESCs) for the Eachine Falcon FPV Drone Racer
The ESCs used by Eachine on this FPV Drone Racer have some great features that include rotation clogging protection ( the ESCs switch off if they are touching an object and this minimise damaging the motors), start protection, overload protection, throttle signal loss protection and motor shaft lock protection. Please note: don’t use any other programme, or the Motor Shaft Lock Protection function will be damaged. The continuous output current is 12A and the maximum discharge current is 18a (less than 10S). The ESCs have Oneshot functionality with a high quality Mosfet drive and are light and small with built in BEC minis.
Throttle Signal Frequency: 500HZ
Weight: 10g(with cable)
Entrance Angle: Class 4(15°~26.25°)
Eachine Falcon FPV Drone Racer Motors
The Falcon comes with KV2300 motors that deliver a maximum thrust 0f 440G. They are 32.2 millimetres long and 27.9 millimetres wide with a shaft length of 3 millimetres. They use a frame work of 12N14P weighing 25 grams and suitable for 2 or 3 cell batteries and 5 or 6 inch propellers.
Eachine Falcon FPV Racer Flight Controller
The Falcon Flight Controller is the CC3D Standard version, compatible with multi 2.4G receiver, the pins are on the bottom.
Eachine Falcon Drone Battery
The battery that comes with the Eachine Falcon FPV Drone Racer is a 3S 11.1V 1500mAh 25C Battery with a XT60 plug connector
Eachine 700TVL FPV Camera Specification
Power supply: 3.6-5.5V (powered off TX)
Power consumption: 60mA @5V
Imager: 1/3” CMOS, more than 700TVL
Angle: 127° diagonal FOV, 110° horizontal FOV
FPV tuned light handling
NTSC or PAL (selectable; jumper on = PAL).
Lens: 2.6mm IR coated
FOV: 127°diagonal 110°horizontal (ideal for fixed camera)
Operation Temperature: -20 to 70°C
Square: 32 X 32 X 23.5mm
Lens extrude (LxDia): 15mm X 14mm
Eachine Falcon FPV Drone FT200 VTX
Modulate: Wideband FM Modulate
Video Format: NTSC/PAL
Output Impedance: 50 Ohm
Output Power: 23-24dBm
Channel: 32 CH
Operating Voltage: 7V-24V
Supply Current: 190mA
Operating Temperature: -10~85 Video Band Width : 0~8.0 MHz
Audio Carrier Frequency: 6.5 MHz
Video Input Level: 0.8~1.2 Vp-p
Video Input Impedance: 75 Ohm
Audio Input Level: 0.5~2.0 Vp-p
Audio Input Impedance: 10K Ohm
Transmitting distance > ~1500m (open area)
LED indicators for Fr/Ch
Connector: RP-SMA Female
Antenna connection: RP-SMA Male
Dimension: 38mm x 22.5mm x 6mm
Eachine Falcon FPV Racer Remote Control Transmitter FlySky i6
This FlySky i6 Remote Control Transmitter works in the frequency range of 2.405 to 2.475GH and uses a high gain and high quality multi directional antenna. Each transmitter has a unique ID and is contructed using a low power electronic components and sensitive receiver chip. The AFHDS2A system has an automatic identification function and built-in multiple channel coding and error-correction. The Falcon FlySky i6 Remote Control Transmitter is 6 Channels with a radio frequency range of 2.40 to 2.48 Giga Hertz operating at a Bandwidth of 500 KHz (band 142). The radio frequency power is less tha 20dBm.It’s a 2.4ghz System at AFHDS 2A and AFHDS code type GFSK with a 1024 sensitivity rate. The Eachine Falcon Transmitter does not have a charger port and weights 392 grames. It can memories up to 20 RC models and on-line updates are available. We have used this FlySky i6 FPV Racer Remote Control Transmitter on many of our Drone Flyers FPV Racer builds and highly recommend it.
Your Eachine Falcon FPV Racer will come with the following
1 x Falcon FPV Racer Frame Kit
1 x Falcon FPV Racer PDB
4 x Falcon FPV Racer Motor Base
4 x Falcon FPV Racer 2204 High Speed Motors
4 x Falcon FPV Racer 20A Electronic Speed Controllers
1 x Falcon FPV Racer Flight Controller
4 x Propeller Blades
1 x Power Connector
4 x LED Lights
1 x 3S 11.1V 1500mAh 25C Drone Racer Battery
1 x B3 Drone Battery Charger
1 x 700TVL FPV Camera
1 x Camera Mount
1 x FT200 VTX
1 x Antenna
1 x FlySky i6 Transmitter
1 x FlySky iA6 Receiver
We recommend the Hawkeye 5 inch Little Pilot FPV Screen to accompany this Model CLICK THIS LINK
Eachine Racer 250 FPV Drone with I6 2.4G 6CH Transmitter and 7 Inch 32CH Monitor High Definition Camera Ready to Fly
This FPV Drone Racer from Eachine has already sold out once and new stocks are expected around the 13th of January CLICK THIS LINK
Drone Flyers have already tested this Drone Racer and can highly recommend it. It’s a perfect solution for anyone wanting to enter the exciting world of Drone Racing. A simple to set up and use FPV Drone Racer, easy to fly and with parts available
Eachine EC250 Racer Drone With RadioLink 2.4G 9CH AT9 Transmitter R6D CC3D RTF CLICK THIS LINK